Contractor SelectionUpdated November 2026Selection guide

How to choose a solar panel installer in Portugal

By Kellogg Fairbank · Co-founder of remodel · Last updated November 2026
Solar installer discussing roof suitability and installation plans with a homeowner at a Portuguese coastal property, choosing a solar installer in Portugal 2026
Choose a solar panel installer in Portugal by checking who will carry out the work, verifying applicable credentials, assessing experience and comparing written proposals.

Before appointing, understand the survey process, equipment, installation scope, warranties and aftercare.

A competitive price matters. So does the reasoning behind the system: why that capacity, why those components and how the proposal reflects your electricity use and property conditions.

The aim is to appoint a team that can assess, install and support a suitable system, with responsibilities clear from the first survey through to handover.

This guide concerns photovoltaic systems that generate electricity, including installations with optional battery storage.

ERSE
Advises verifying that the installation entity or technician is recognised by DGEG.[1]
DGEG
Distinguishes installation entities, responsible technicians and inspection entities.[2]
IMPIC
Construction authorisation, where applicable, is a separate check from electrical credentials.[3]
Direct contract
Remodel introduces solar installers. You contract directly with the company.

Establish who you would contract with


Ask who legally contracts with you, who carries out the electrical installation and who handles payments and defects, before comparing credentials or accepting a proposal.

The company selling a system may use employees, subcontractors or a separate installation partner. Ask how the arrangement works before comparing credentials or accepting a proposal.

Request

  • The contracting company's legal name, NIF/NIPC and address.
  • The identity of the entity or professional carrying out the electrical installation.
  • The responsible technical contact.
  • Who receives payments and issues invoices.
  • Who handles installation defects and warranty enquiries.

Check that the documents refer to the relevant business and explain any differences. If installation is subcontracted, establish how it is supervised and how your contractual support route works.

Verify applicable credentials


ERSE advises verifying that the installation entity or responsible technician is recognised by DGEG. Check any applicable IMPIC authorisation and insurance separately.
Official sourcePortugal's energy regulator ERSE advises consumers to verify that the installation entity or responsible technician is recognised by DGEG. Its consumer guidance recommends requesting the technician's registration number and checking recognition through DGEG's application.[1]

Ask which recognised entity or technician will be responsible for your installation and request the relevant details. DGEG distinguishes installation entities, responsible technicians and inspection entities, with different roles.[2]

Do not treat a manufacturer's training badge or a general claim of being "certified" as a complete answer. Ask what the credential covers and how it applies to the work proposed.

Where construction authorisation is applicable, request the relevant IMPIC details and verify them through the official consultation service.[3] This is a separate check from the electrical credentials relevant to the installation.

Also request evidence of applicable insurance. Establish the insured entity, activities, dates and relevant limitations. Ask for clarification from the appropriate adviser where the arrangement or scope is unclear.

Look for experience that matches your property


Ask about installations with similar roof materials, access constraints and electrical arrangements. Local experience helps with logistics but does not replace a property-specific assessment.

Ask about installations with similar roof materials, access constraints and electrical arrangements. If you want batteries, discuss experience with the proposed equipment and configuration.

Useful questions

  • Have you installed systems on this type of roof?
  • How do you assess fixing methods and weatherproofing?
  • What happens when a roof needs repair or further assessment?
  • Have you coordinated installations with renovation contractors?
  • Can previous customers describe the survey, installation and aftercare?
NoteWith permission, speak to a recent customer. Ask whether the final scope matched the quote, how additional work was handled and whether monitoring and support were explained at handover.

Experience in your area can help with practical logistics. It does not replace a property-specific assessment.

Understand the survey process


A remote assessment can support a preliminary proposal. Before agreeing scope, confirm which checks remain outstanding and which findings could change the price.

An initial discussion or remote assessment can help an installer develop a preliminary proposal. Ask what it establishes and which checks remain outstanding.

Before the final scope is agreed, the process should address the matters relevant to your property:

Survey: assessment areas and questions to resolve
Assessment areaQuestions to resolve
Electricity useWhat consumption information and occupancy pattern support the proposed size?
Roof layoutHow have usable space, orientation and shading been assessed?
Roof conditionAre repairs, a specialist roof inspection or an engineer's assessment needed?
AccessHow will installers and equipment reach the work area?
Electrical installationWhat connections, protection or remedial work are required?
Equipment locationsWhere will the inverter, battery and cable routes be placed?
Procedures and consentsWhat needs confirming for this system, building and location?
ImportantFor an apartment or shared roof, establish the position with the relevant building representatives and advisers. Do not assume that an installer's equipment proposal resolves ownership or permission questions.

If the price remains subject to a survey, ask which findings could change it and how revised work would be approved.

Ask why the equipment suits your needs


A useful proposal names panels, inverter and any battery with ratings, and explains why that design suits your consumption and property.

A useful proposal names the components and explains the design.

Ask for the panel manufacturer, model, quantity and total rated capacity in kWp. The inverter model, power rating and configuration should also be identified.

If storage is included, check usable battery capacity in kWh, power capability and compatibility. Where future battery installation matters, ask what has actually been provided to support it and what extra equipment may be needed.

NoteIf you want power during an outage, ask specifically about backup capability, supported circuits and additional equipment. The presence of a battery does not, by itself, answer that question.

Agree how proposed product substitutions will be handled. Any alternative should be explained and documented before installation.

Examine generation and savings assumptions


Ask the installer to separate estimated generation from household use and make tariff, self-consumption and battery assumptions visible in the proposal.

Ask the installer to separate estimated annual generation from the amount expected to be used in your home.

Provide recent bills and, where available, consumption data showing when you use electricity. Explain seasonal occupancy and planned changes such as an EV charger or heat pump.

The proposal should make its assumptions visible

  • Shading, orientation and the generation estimate.
  • Daytime use and expected self-consumption.
  • Battery operation, where proposed.
  • Electricity tariff and any surplus-income assumption.
  • Maintenance and replacement assumptions used in long-term calculations.

Keep temporary tariff discounts separate from the estimated benefit of solar generation. A supplier's best-case saving or another customer's result does not establish what your property will achieve.

Ask how the recommendation changes if your consumption differs from the assumed pattern.

Compare the full installed scope


Use the same property information for every written proposal, then compare installed scope, inclusions, exclusions and assumptions before comparing totals.

Use the same property information when requesting proposals. Then compare inclusions and assumptions before comparing totals.

Check mounting, weatherproofing, access equipment, cabling, electrical protection, testing, paperwork and monitoring setup. Identify roof repairs, board upgrades and decorative reinstatement that sit outside the price.

Request the total including applicable IVA, quote validity and payment terms. For staged payments or subscriptions, obtain the total payable, term, ownership arrangements and included services.

An exclusion can be legitimate. It needs an identified delivery responsibility and cost allowance. Unclear work should remain an open question until it is resolved in writing.

Companion guideFor a more detailed pricing framework, read Remodel's companion guide, How Much Do Solar Panels Cost in Portugal? What Your Quote Should Include.

Installer comparison checklist


Use one copy per shortlisted company. Record evidence and outstanding questions rather than relying on an overall impression of each installer.
One copy for each shortlisted company
CriterionEvidence or explanation to requestWhat to establish
Contracting entityLegal name, NIF/NIPC and proposed agreementWho is accountable to you?
Installation credentialsRelevant DGEG recognition and responsible technician detailsWho is authorised for the installation role?
Other applicable authorisationRelevant IMPIC details where requiredDoes the authorisation fit the proposed work?
InsuranceCurrent evidence and scopeWhich entity and activities are covered?
Relevant experienceComparable installations and referencesHas the team handled similar conditions?
Survey processAssessment stages and outstanding checksWhat is confirmed before the price becomes final?
EquipmentNamed models, ratings and layoutWhat exactly will be installed and why?
Performance estimateGeneration and savings assumptionsIs the assessment specific to your use and property?
Installation scopeInclusions, exclusions and provisional workWhich additional costs or interfaces remain?
DeliverySurvey, procurement and installation programmeWhich dates are confirmed and what do they depend on?
WarrantiesProduct, performance and workmanship termsWhat remedy and claim process apply?
AftercareContact, service arrangements and chargesWho helps when something goes wrong?
HandoverRecords, monitoring access and operating informationWhat will you receive before the installation is signed off?
ImportantResolve critical credential or technical questions before appointment. A strong price or reference does not remove the need to clarify them.
Comparing installers for your property?
Tell Remodel where your property is, what type of building it is and what you want to achieve. We check for a suitable introduction, subject to availability in your area. The installer confirms the assessment needed and provides its own proposal.
Tell us about the job

Read the different warranties separately


A headline such as a 25-year warranty describes only part of a system's protection. Read product, performance, inverter, battery and workmanship terms separately.

"A 25-year warranty" is an incomplete description of the protection offered across an entire system.

Product

Panel product defects.

Performance

Panel performance commitments.

Inverter and battery

Inverter and battery cover.

Workmanship

Installation workmanship.

Extensions

Any separately purchased service or warranty extension.

Ask who provides each promise and what the remedy covers. Check conditions, exclusions and responsibility for diagnosis, labour, transport, access equipment and removal or refitting where relevant.

For batteries, ask about operating conditions, throughput or cycle limits where applicable. If transfer to a future property owner matters, confirm the terms.

Manufacturer warranties, workmanship promises and statutory consumer rights are distinct. Have legal questions about their application reviewed by the relevant adviser.

Agree aftercare before installation


Agree before installation who you contact for faults, low generation or monitoring failures, what is charged and who manages manufacturer claims.

Ask who the customer contacts if monitoring stops, generation appears low, equipment reports a fault or a leak is noticed near the work.

Clarify

  • The support contact and reporting channel.
  • Whether remote monitoring or diagnosis is included.
  • How response and attendance are arranged.
  • Which call-outs or maintenance services may be charged.
  • Who manages manufacturer claims.
  • What happens if a subcontract installation team is no longer available.

If a response time is important, request the commitment in writing. Distinguish an acknowledgement of the enquiry from a promise to attend or repair.

Confirm paperwork and handover responsibilities


Ask who handles DGEG procedures, network coordination and any required inspection, and request the records, monitoring access and operating information relevant to your system.

Ask who handles the applicable DGEG procedures, network coordination and any required inspection. ERSE's self-consumption guidance identifies verification of installer credentials, equipment certification and applicable registration or inspection among the matters to address.[4]

Request the records relevant to your system, including equipment details, test and commissioning information, registration or other applicable process records, warranties and operating instructions.

Make sure the owner has the agreed monitoring access and understands how to identify and report a fault. Record outstanding items and who will close them out.

Questions to ask before appointing


Ten questions cover the contracting entity, credentials, survey, design, exclusions, savings, warranties, paperwork, handover and aftercare. Ask them of every shortlisted installer.
  1. Who signs the contract, and who carries out the installation?
  2. Which recognised entity or technician is responsible for the electrical work?
  3. What does the survey cover, and what could still change the price?
  4. Why does the proposed system fit our consumption and property?
  5. Which roof, access or electrical works are excluded?
  6. What do the savings figures assume?
  7. What are the separate equipment and workmanship warranties?
  8. Who handles paperwork, inspection and network coordination where applicable?
  9. What records and monitoring access will we receive?
  10. Who provides aftercare, under what terms and at what cost?

Frequently asked questions


Find a suitable solar installer
Tell Remodel where your property is, what type of building it is and what you want to achieve. Include approximate electricity use, battery interest, known roof issues and preferred timing. We will review your enquiry and check for a suitable introduction, subject to availability in your area. Tell us if solar needs to be coordinated with roofing, electrical or renovation work.
Tell us about the job
Official sources

Related reading: Solar panel costs in Portugal, Solar panel installers, How to find a trustworthy contractor, How to compare renovation quotes

Kellogg Fairbank
Kellogg Fairbank
Co-founder, Remodel · Cascais, Portugal

Kellogg is a former payments executive turned entrepreneur, with a family background in real estate. He has spent the past year bringing that experience to the Portuguese property market, and co-founded remodel to apply the same rigor to how contractors are vetted.

Researched 16 November 2026. Confirm requirements for the proposed property and system through the relevant professionals and current official guidance. Remodel provides introductions and does not provide the installation or warranty. You decide whether to proceed and contract directly with the company.